WARNING: This product can expose you to chemicals including nicotine, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Not Just A Faze
Looking for an affordable dry herb vape that actually works well? Well if you're anything like us at Got Vape, then that’s exactly what you've been craving… which is why we’re pleased to present the Wulf Mods Faze Portable Dry Herb Vaporizer for your session enjoyment!
The Wulf Faze is heavy hitting handheld dry herb vape capable of outputting a wide range of 4 temperatures (380˚F, 410˚F, 430˚F, 460˚F) letting you enjoy everything from lower temp flavor, all the way to high temp potency in one pocket sized device.
The Faze works by first pre-heating your dry herbs for 20s and then opening up for 3 minutes of open seshing where you can casually sip from your device for a constant stream of vapor. This makes for an incredibly seamless session, letting you pack, warm, and then kick back to enjoy your dry herbs all at your own pace.
The quality of life boosts continue with a magnetic mouthpiece, complete with a built-in filter, sitting above your dry herb chamber to provide a straight shot of vapor and easy access for packing / cleaning. Add in a weighty body that feels great in the hand and ergonomic ridges for added grip, to make the Wulf Faze one vape you are not going to want to put down.
This makes the Wulf Faze Dry Herb Vaporizer an incredible choice to efficiently vape your favorite dry herbs, all the while saving money with its more affordable pricing. Check out the X amount of color including crowd pleasers like black-red spatter and enter a new phase with the help of your own Wulf Mods Faze Portable Dry Herb Vaporizer!
How To Load The Wulf Faze
To load the Wulf Faze Vaporizer remove the magnetic mouthpiece to expose the dry herb chamber located beneath. Now gently pack your desired amount of dry herbs into the chamber and replace the mouthpiece to commence vaping.
Remember that it’s always better to pack lightly and avoid over-filling in order to get the best performance from your Wulf Faze.
How To Use A Wulf Faze
To use a Wulf Faze Vaporizer press the power button 5x to turn the battery on, this will cause your device to vibrate once and the screen will switch on.
From here press the power button 2x in a row to start your session. This will activate the 20s pre-heat period where your dry herbs will be slowly warmed to the proper temperature for vaporization.
Once the 20s pre-heat has completed, your Wulf Faze Vaporizer will vibrate 2x and enter a 3 minute session period in which you can draw from your device at will to enjoy a constant stream of satisfying vapor.
After the 3 minutes have passed your Wulf Faze Vaporizer will vibrate once and cease heating and you can now remove the mouthpiece to clear out the already vaped dry herbs.
How To Change Voltage On The Wulf Faze
To change voltage settings on your Wulf Faze press the power button 3x in a row. This will cycle through the various voltages allowing you access all 4 available temperatures (380˚F, 410˚F, 430˚F, 460˚F).
How To Pre-Heat The Wulf Faze
To pre-heat the Wulf Faze press the power button 2x in a row. This will start a 20s pre-heat period where your dry herbs are warmed to perfection, before entering into a 3 minute session mode to allow you to freely rip your Faze at will.
To cancel pre-heat mode on the Wulf Faze hold down the power button for 3s.
How to Charge the Wulf Faze
To charge the Wulf Faze Vaporizer make use of the USB-C port located on the bottom of the device. When plugged in your Wulf Faze will vibrate once and then a yellow battery icon will flash to let you know things are charging correctly.
Over time while charging 4 different power bars will fill letting you know when you're at 25%, 50%, 75%, and finally 100%. When fully charged your Wulf Faze battery icon will stop flashing and all 4 of the power bars will be displayed as full.
The first time you charge your Wulf Faze, leave it plugged in for 2 hours, every time after that never charge your device longer than 1 hour at a time to prevent battery issues.
Wulf Faze Troubleshooting
In order to get the most out of your Wulf Faze Vaporizer you should be aware of the following troubleshooting warnings that can occur. This way, like Lassie providing crucial information about who is trapped in the well, you’ll be able to understand exactly what your Wulf Faze is trying to tell you.
How to Clean The Wulf Faze
To clean the Wulf Faze Vaporizer first power off the device by pressing the power button 5x and leave enough time for your chamber to cool off.
Once ready, you can remove the mouthpiece from your Wulf Faze and take the included cleaning brush to knock out all of the vaped buds contained within. Then use a cotton swab to remove any lingering pieces of herb.
Next, use the cleaning brush to clear any dry herbs from the screen of your mouthpiece, before finally wiping down the entire component with a cleaning wipe in order to keep things fresh and sanitary.
With your Wulf Faze Vaporizer 100% clean you can now get back to vaping dry herbs like you used to. Remember to always let all moisture air dry before using your battery again after cleaning.
What’s Included:
- (1) Wulf Mods Faze Portable Dry Herb Vaporizer
- (2) Screens
- (1) Type-C USB Cable
- (1) Cleaning Brush
- (5) Cotton Swabs
- (1) User Manual
WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
You may also like
More from Wulf Mods
Recently viewed
